Stoves

Chimney Products

Fireplace Inserts

OUTDOOR PRODUCTS

Log Sets

Accessories

Home > Wood Fireplace Inserts > Osburn Wood Burning Fireplace Inserts >

Osburn 1600 Fireplace Insert OB01601

Alternative Views:

: $2,149.00

Product Code: OSBURN-1600-INSERT-OB01601

Free Blower:

Free Shipping:

Osburn Door Overlay (required)*:

Osburn Trim Kit (required)*:

Osburn Faceplate (required)*:

Venting Accessories:

Insulation kit:

$125 Off Any Chimney Liner Kit

Chimney Liner Kit:

Qty:

Specifications

Technical Specs

Extended Information

500-1800 sq.ft., 17" log, 65,000 BTUs, 80% efficiency, 2.0 cu.ft. fire box, 378 lbs
Discontinued. DO NOT ORDER. Contact us at 914-407-4070 for information on new models also at great prices!

Osburn Fireplace Insert 1600 OB01601

PRODUCT SPECIFICATIONS

Firebox – dimension (Depth) : 14 3/4''

Firebox – dimension (Width) : 18 1/8''

Firebox – dimension (Height) : 12 7/8''

Maximum log length : 17''

Door opening - dimension (Width) : 15 5/8''

Door opening – dimension (Height) : 8 1/2''

Door type : Single, glass with cast iron frame

Glass surface – dimensions (Width X Height) : 15'' x 8 3/8''

Steel thickness – body : 3/16"

Weight : 378 lb (172 kg)

Firebox volume (cu. ft.) : 2.0

Fireplace opening – minimum (Width) : 26 3/8"

Fireplace opening – minimum (Height) : 22 5/8

Fireplace opening – minimum (Depth) : 14 3/8"

Glass type : Ceramic glass

Overall dimension (Depth) : 26''

Overall dimension (Height) : 22 5/8''

Overall dimension (Width) : 25 7/8''

Clearance – top (measured from the platform on which the appliance is installed) : N.A.

Center line of flue outlet to the back : 6''

Center line of flue outlet to the side : 12 1/8''

Canadian standard (emissions) : CSA B415.1

USA standard (emissions) : EPA Method 28

Canadian standard (safety) : ULC S628

USA standard (safety) : UL 1482, UL 907

Overall heat output rate (max.) : 42,400 BTU/h (12.4 kW)

Overall heat output rate (min. to max.) : 11,800 BTU/h (3.5 kW)

Average CO : 68.0 %

Maximum heat output (dry cordwood) : 65,000 BTU/h (19.0 kW)

Fuel type : Dry cordwood

Type of chimney : CAN/ULC S629, UL 103 HT (2100 °F)

Minimum chimney height (feet) : 12

Log positioning : Over width

Recommended heating area (sq.ft.) : 500 - 1,800

Steel thickness – top : 5/16"

Optimum efficiency : 80 %

Average particulate emissions rate : 4.44 g/h

Recommended chimney diameter : 6"

Baffle type : High heat-resistant C-cast

Maximum burn time : 6 h

Warranty : Limited lifetime

Tested and listed as per applicable standards : By an accredited laboratory (CAN/USA)

Minimum clearances to combustibles *

(Data expressed in inches. 1 inch = 25.4 mm)

Clearance – combustible side mantle to unit	10''
Clearance – side wall (room)	16''
Clearance – combustible top mantle to unit	16''
Combustible shelf to unit	22''
Minimum floor protection in front of unit	Canada : 18" USA : 16"

Product Details

Osburn Fireplace Insert 1600 OB01601

Osburn Wood Fireplace Insert 1600 Manual

If you are looking for and efficient fireplace insert then look no further, the Osburn 1600 has a optimum efficiency of 80% and it will heat up to 1600 square feet. So what's more? The Osburn 1600 includes a 130 cfm ultra quiet blower and has a steel thickness of 5/16 on top of the insert. The Osburn 1600 has the glass air wash feature so you will spend less time cleaning the glass and more time enjoying the fire through the large view door on the Osburn 1600.
With its compact design, the 1600 insert can be installed in a fireplace as small as 14.5'' deep. Even so, it offers a performance of up to 65,000 BTU/hr and burns 17'' logs. The standard 130-CFM blower helps maximize the stove's energy performance, and the very low emission rate, even at normal operating temperatures, makes the 1600 insert an excellent choice for those seeking an environmentally friendly but ultra-efficient source of heat.