|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kingsman Vented Gas Fireplace Insert VFI25
Kingsman Vented Gas Fireplace Insert VFI25 Brochure
Inserts are complete units that fit into existing fireplaces. They require no additions such as glass doors or screens, and consist of a combustion chamber with gas logs. They are usually installed in an existing chimney, provided an approved flue liner is installed. Inserts are typically available for a vented or direct vent application.
Uses air cooled pipe (B-vent), or gas flue liners to vent appliances. These types of appliances use room air for combustion and exhaust through the B-vent pipe or flexible gas liner. Vented appliances are not as restricted in venting length as compared to direct vent appliances and can use existing chimney systems by running gas flex liner into existing chimneys and terminating with a raincap and flashing.
|
Kingsman Direct Vent Gas Fireplace Insert IDV26
Kingsman Direct Vent Fireplace Insert IDV26 Brochure
Inserts are complete units that fit into existing fireplaces. They require no additions such as glass doors or screens, and consist of a combustion chamber with gas logs. They are usually installed in an existing chimney, provided an approved flue liner is installed. Inserts are typically available for a vented or direct vent application.
Direct Vent Fireplace Insert uses a dual vent system, generally two 3" flex gas lines, one pipe is for exhaust, while the other pipe brings in outside air for combustion. The design of these inserts allows for a completely sealed system that does not compromise inside air quality of your home.
|
85,000 BTUs. 750-2300 SqFt, 75% efficiency, 3.1 CuFt Fire box, 18 inch logs, 420 Lbs
|
Monessen Direct Vent Gas Fireplace Insert Reveal
“Reveal” your new room with this exciting upgrade to your existing masonry fireplace. It’s as efficient as it is attractive, and the Reveal insert’s three sizes allow it to fit into both large and small fireplaces.
Monessen Direct Vent Gas Fireplace Inserts Brochure
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Breckwell Wood Fireplace Insert W3100I
Take control of your family's warmth and have no worries about the air we breathe, heat with Breckwell's modern, efficient, clean burning wood fireplace. The fireplace insert is easy to install and offers a panoramic view of dancing flames through wide, stay-clean glass door. Wall clearances are small and the insert is approved for most zero-clearance fireplaces. Breckwell's advanced design delivers more heat where you need it ... at the front of the stove. Radiant heat moves faster through glass than steel, and Breckwell maximizes heat production at the front near the glass.
|
Osburn Wood Fireplace Insert 2400
Osburn Wood Fireplace Insert 2400 Manual
The 2400 insert has the same firebox as its freestanding counterpart, and will transform any conventional decorative fireplace into a highly efficient heating system. Its 100,000 BTU/hr, combined with a 3.2 cubic foot firebox, will help you to rest easy during those long winter nights, and its large glass window offers a perfect view of the fire.
|
Napoleon Wood Burning Insert EPI-1101
Napoleon Wood Burning Stoves and Inserts Brochure
The 1101 wood burning insert won a prestigious industry award for its unique design, which allows for flush mount or hearth mount installation in either a masonry or factory built fireplace. Featuring an elegantly designed full view single door, standard WHISPER QUIET™ heat circulating blower & thermostatic sensor, this innovative design transforms small amounts of wood into large amounts of cozy heat. Customize your 1101 insert with an optional cast iron surround kit that will enhance your décor, available in porcelain enamel Majolica brown or painted black finishes.
|
Breckwell Wood Fireplace Insert W180I
The SW180I Wood Fireplace Insert provides the same efficiency and heat output of the SW180 freestanding unit in a wood-burning insert. The perfect alternative to a drafty chimney, the SW180I fits easily into your existing masonry fireplace and will fit almost any UL listed pre-fab fireplace.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
75,000 BTUs. 500-2100 SqFt, 75% efficiency, 2.4 CuFt Fire box, 20 inch logs, 399 Lbs
|
Napoleon Gas Fireplace Insert GI3600
Napoleon Gas Fireplace Inserts Brochure
Here’s the secret to a warmer, cozier home! Replace your drafty old fireplace with this beautiful Napoleon® insert. The GI3600 Gas Fireplace Insert is especially designed to fit smaller wood burning, zero clearance fireplaces. Create the exact designer touch with optional choices including bay fronts, flashing kits and cast iron surrounds in various finishes.
|
Napoleon Gas Fireplace Insert GDI44
Napoleon Gas Fireplace Inserts Brochure
Napoleon’s GDI44 gas fireplace insert boasts an incredible 75% flame/heat adjustment (up to 40,000 BTU’s down to 10,000 BTU’s), more than any other insert! This is the perfect solution to improve your existing inefficient wood burning fireplace and at the same time, offering a huge viewing area to enjoy the beautiful, mesmerizing flames. Trims kits, decorative panels and decorative doors are available so the GDI44 matches any decor.
|
Osburn Fireplace Insert 1800
Osburn Wood Fireplace Insert 1800 Manual
Like their cousins in the 1800/2200 freestanding series, the 1800 series inserts offer the same tried-and-tested architecture and the same great features, including a magnificent view of the fire through the bay window. They are also equipped with a powerful blower, transforming your old, inefficient fireplace into a highly effective heating system. The 1800 series insert is both practical and elegant, and is a perfect choice for your living room or basement fireplace.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Timberwolf Pellet Fireplace Insert TPI35
Timberwolf Series Brochure
There truly is no downside to owning a Timberwolf TPI35 Pellet Burning Fireplace Insert. In addition to using a fully-renewable fuel source, this impressive fireplace insert features a 76.3-percent efficiency rating. That means that it is capable of heating an 800 to 2,000 sq. ft space with significantly less fuel than even other pellet inserts. This pellet insert also features a 45-pound capacity hopper and a thirty-hour maximum burn time, meaning that you'll spend less time reloading and more time relaxing.
Simply put, a Timberwolf TPI35 Pellet Burning Fireplace Insert will allow you to get more heat for less money and less effort. And it will have very little impact on the environment. As a budget-minded homeowner and an eco-conscious consumer you really won't find a better secondary heat source..
|
Osburn Fireplace Insert 1100
Osburn Wood Fireplace Insert 1100 Manual
The Osburn 1100 insert is the ready-made solution for smaller stone fireplaces. With its back face at a 45˚ angle, it offers a wide range of configurations.The floor of its firebox is 2.5 inches deep, allowing greater accumulation of ashes and cleaner use. The Osburn 1100 insert also comes with a powerful 120 CFM blower. You'll be amazed and delighted by the 50,000 BTU of heat the Osburn 1100 provides!
|
65,000 BTUs. 500-1800 SqFt, 80% efficiency, 2.0 CuFt Fire box, 17 inch logs, 360 Lbs
|
Breckwell Pellet Fireplace Insert Tahoe (SP2000I) Tahoe ManualThe Tahoe insert offers the homeowners the same quality stove as our freestanding models, but it installs directly into your existing fireplace. The large three-glass bay windows showcase a 180 degree fire-filled panorama view and the decorative outside flashing provides the finishing touch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Monessen Direct Vent Gas Fireplace Insert Harmony
Make a statement with the Harmony fireplace insert. Featuring five different framing choices and two distinct interior options, this insert also offers increased heating efficiency, so you’ll save energy and lower your fuel costs.
Monessen Direct Vent Gas Fireplace Insert Harmony Brochure
|
Napoleon Pellet Insert NPI45
Napoleon Pellet Stove and Insert Brochure
With Napoleon’s advanced pellet technology and efficient heat exchanger, the Napoleon® pellet stove insert will have no problem living up to your “performance” expectations. Napoleon’s pellet insert comes complete with a 120 CFM convection blower system, convenient auto ignitor, airwash system, stylish black trivet and dual painted black accent rods. It is convenient to use, easy to maintain and easy to fill without having to “refuel” for up to 45 hours!
|
Napoleon Gas Fireplace Insert GDIZC
Napoleon Gas Fireplace Inserts Brochure
The multi-level advanced burner technology of the GDIZC produces beautiful, realistic YELLOW DANCING FLAMES® and the exclusive PHAZER® log set and charcoal ember bed are so realistic, they will be mistaken for a real wood fire. This Vesta Fireplace Industry award winning fireplace insert is designed to fit the smallest fireplace openings but offers a large, 400 square inch ceramic glass viewing area. The perfect gas fireplace insert for any room in your home.
|
Napoleon Gas Fireplace Insert IR3
Napoleon Gas Fireplace Inserts Brochure
Napoleon’s IR3 is a direct vent gas insert which offers many standard features including Napoleon’s PHAZER® log set that fills your firebox with beautiful YELLOW DANCING FLAMES®. The IR3 features Napoleon’s advanced infrared technology and is perfect for smaller living spaces. The IR3 is great for home owners who want the cost saving benefits of Zone Heating (heating the room you use most) plus the benefit of replacing an old drafty masonry fireplace with an efficient heating source.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
70,000 BTUs. 750-2000 SqFt, 76% efficiency, 2.3 CuFt Fire box, 18 inch logs, 397 Lbs
|
Kingsman Direct Vent Gas Fireplace Insert IDV33
Inserts are complete units that fit into existing fireplaces. They require no additions such as glass doors or screens, and consist of a combustion chamber with gas logs. They are usually installed in an existing chimney, provided an approved flue liner is installed. Inserts are typically available for a vented or direct vent application.
Direct Vent Fireplace Insert uses a dual vent system, generally two 3" flex gas lines, one pipe is for exhaust, while the other pipe brings in outside air for combustion. The design of these inserts allows for a completely sealed system that does not compromise inside air quality of your home.
|
100,000 BTUs. 1000-2700 SqFt, 78% efficiency, 3.2 CuFt Fire box, 18 inch logs, 525 Lbs
|
Napoleon Wood Burning Insert EPI3T/EPI3C (traditional/contemporary)
Napoleon® adds to their wood burning collection with the new EPI3T & EPI3C EPA wood burning inserts. The EPI3T has a traditional flush front with a cast iron surround and the EPI3C has a contemporary flush front with a cast iron surround. The EPI3’s give customers the option of a wood burning insert that will match any décor, whether it be traditional or contemporary.
Four stainless steel secondary air tubes supercharge the fuel burning process and generate a beautiful display of YELLOW DANCING FLAMES®. Complete with a removable painted black log retainer and a heat circulating blower, both the EPI3T & EPI3C are perfect heating solutions for your home or cottage.
|
|
|
Mantels
